Item | Specification | Features | ||
Falcon 250 Frame Kit |
Dimension: 230 x 245 x 90mm Package Size: 440 x 300 x 100mm Weigh: 408g (without battery propeller) Take off Weigh: 535g Package Weigh: 1.85kg |
Compatible with max 6 inch propeller Compatible with 2206,2208 motor Can be used with 4S/3S battery With Seft-protection function With direction indicator LED Inclined motor base design, fast speed Removable protection motor base |
||
ESC | Model: Fairy-20A Continuous Current: 20A Instantaneous Current(10S): 30A BEC: No Li-Po Battery: 2-4S Weight: 7G Size(without plug): 28 x 15 x 6mm | Motor Shaft Lock Protection (don’t use the other programe, or the funtion will be damaged) Support OneShot 125 Adopt powerful high performance MCU Smaller size and lighter Special for multirotor, more sensitive during flying Strong adaptive ability Support the refresh rate of throttle siginal up to 500Hz, compatible with multi flight controller (notice:>=500Hz is nonstandard throttle siginal) Prevent locked rotor protection |
||
Motor | KV:2300 MAX Thrust:440G Length: 32.2MM NO.OF Cell:2-3S Diameter: 27.9MM Framework: 12N14P Shaft:3MM Propeller:5-6 inch Weight: 25G |
|||
Flight Controller |
CC3D Standard version, compatible with multi 2.4G receiver, pins are on the bottom. | |||
Battery | 3S 11.1V 1500mAh 25C Battery ,XT60 plug | |||
700TVL Cam | Power supply: 3.6-5.5V (powered off TX) Power consumption: 60mA @5V Imager: 1/3” CMOS, more than 700TVL Angle: 127° diagonal FOV, 110° horizontal FOV FPV tuned light handling NTSC or PAL (selectable; jumper on = PAL). Lens: 2.6mm IR coated FOV: 127°diagonal 110°horizontal (ideal for fixed camera) Operation Temperature: -20 to 70°C Square: 32 X 32 X 23.5mm Lens extrude (LxDia): 15mm X 14mm Weight: 12g |
|||
FT200 VTX | Modulate: Wideband FM Modulate Video Format: NTSC/PAL Output Impedance: 50 Ohm Output Power: 23-24dBm Channel: 32 CH Operating Voltage: 7V-24V Supply Current: 190mA Operating Temperature: -10~85 Video -Band Width : 0~8.0 MHz Audio Carrier Frequency: 6.5 MHz Video Input Level: 0.8~1.2 Vp-p Video Input Impedance: 75 Ohm Audio Input Level: 0.5~2.0 Vp-p Audio Input Impedance: 10K Ohm Transmitting distance > ~1500m (open area) LED indicators for Fr/Ch Connector: RP-SMA Female Antenna: RP-SMA Male,LHCP Dimension: 38mm x 22.5mm x 6mm Weight: 6g (without antenna) Frequency and channel frequency table: |
Package Included:
1 x Frame Kit
1 x PDB
4 x Motor Base
4 x 2204 Motor
4 x 20A ESC
1 x Flight Controller
4 x Propeller
1 x Power Connector
4 x LED
1 x 3S 11.1V 1500mAh 25C Battery
1 x B3 Charger
1 x 700TVL Camera
1 x Camera Mount
1 x FT200 VTX
1 x Antenna
1 x Bag